Gigabit PoE+ Managed Switch -4*10/100/1000Tx PoE (120W) + 2*100/1000 SFP Slots
Environmentally Hardened Design
AADONA Industrial 4-Port Gigabit 802.3at PoE+ Switch, SMS-4GP2S, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the SMS-4GP2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the SMS-4GP2S can be placed in almost any difficult environment. The SMS-4GP2S also allows either DIN rail or wall mounting for efficient use of cabinet space.
Redundant Ring, Fast Recovery for Surveillance System
The SMS-4GP2S supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The SMS-4GP2S also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault-tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
High Power PoE for Security and Public Service Applications
To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the SMS-4GP2S provides 4 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 120-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 120-watt PoE budget on the whole system, the SMS-4GP2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network devices by providing PoE power, doubling that of the current conventional 802.3af PoE.
Intelligent Alive Check for Powered Device
The SMS-4GP2S PoE Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the PD stops working and responding, the SMS-4GP2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability owing that the PoE port will reset the PD power, thus reducing administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the SMS-4GP2S can effectively control the power supply besides its capability of giving high watts power. The built-in ‘PoE schedule’ function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the SMS-4GP2S not only provides ultra-high transmission performance and excellent Layer 2 technologies but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secured, flexible management and simpler networking application.
Robust Layer 2 Features
The SMS-4GP2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping, MLD v1/v2. The SMS-4GP2S provides 802.1Q tagged VLAN. Via aggregation of supporting ports, the SMS-4GP2S allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.
For efficient management, the SMS-4GP2S Managed Ethernet Switch is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the SMS-4GP2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the SMS-4GP2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session.
The SMS-4GP2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications, binding devices. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the SMS-4GP2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
The SMS-4GP2S provides 4 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 4 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the SMS-4GP2S can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high-performance switch architecture, the SMS-4GP2S facilitates the recorded video files from the 4 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The SMS-4GP2S undoubtedly brings an ideal secure surveillance system at a lower total cost.
Industrial Area Department/Workgroup PoE Switch
Providing up to 4 PoE+, in-line power interfaces, the SMS-4GP2S can easily build a power centrally controlled by IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the SMS-4GP2S makes the installation of IP cameras or wireless AP easier and more efficient.
With IEEE 802.3at Power over Ethernet Plus standard, the SMS-4GP2S can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for travelers.
|Product Description||6-Port Industrial Gigabit PoE+ Managed Ethernet Switch -4*10/100/1000Tx with PoE Injector (30W/Port) + 2*100/1000 SFP Slot, 48-55VDC Power Input|
|Total No Of Ports||4+2 = 6|
|Warranty||5 Year Warranty Pack|
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000Base-X Gigabit Fiber
IEEE 802.3af/at Power over Ethernet
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
IEEE 802.1Q Virtual Local Area Network (VLAN)
IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1X Network Authentication
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 803.3ad Link Aggregation (LACP)
|Processing Type||Store and Forward|
|Protocol||CSMA/CD, IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RARP, RMON, Syslog|
|Flow Control||IEEE 802.3x flow control, back pressure flow control|
|MAC Table size||8K Mac Addresses|
|IGMP Group||Up to 1024 groups|
|Network Redundancy||STP/RSTP/MSTP, Port Trunk with LACP, ERPS(﹤50ms)|
|Configuration||Web-based, Telnet, Console, Cisco-like CLI, HTTPS, TFTP, SSH, SSL, SNMP v1/v2c/v3, RMON, USB|
|Software Features||Storm Protection for Broadcast, Multicast, and Unicast frames QoS – CoS, ToS/Diffserv mapping, SPQ/WRR queuing 802.1Q Virtual Local Area Network(VLAN) IGMP Snooping, IGMP query DHCP Client/Server/Relay with Option 82 Internet Protocol Version 6 (IPv6) Link Layer Discovery Protocol (LLDP) Port Status, Statistics, Monitoring, Security PoE Status, Monitoring, Ping Alarm, Scheduling Port Mirror, LLDP, uPnP, Modbus/TCP|
|Security Features||Static MAC address 802.1X authentication, RADIUS SNMP v3 encrypted authentication and access|
|RJ45 Ports||4*10/100/1000BaseT(X) with 4* PoE+, auto-negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection|
|PoE Pin Out||V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)|
|Fiber Port||2*100/1000 SFP Slot|
|LED Indicators||Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting PoE: On-connected to PD devices SFP: Link/Active|
|Wavelength||Depends on SFP modules|
|RS232 Serial Console||1*RS232 in RJ45 connector with console cable, 115.2bps, 8,N,1|
|Configuration Backup||1*USB 2.0 for firmware update, configuration backup/restore/boot up and syslog|
10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m)
100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m)
|Power Supply||External Din-Rail Industrial Power Supply Unit (Not included & to be purchased separately)|
|Input Voltage||48-55VDC, Redundant Input|
|Overload Current Protection||Present(Slow-Blown Fuse)|
|Power Connection||1 removable 6-contact terminal block|
|Reverse Polarity Protection||Present|
|PoE Power Output||30W max. per PoE port|
|Power Consumption||7.5 Watts for System|
|Max. PoE Power Budget||120W|
|Relay Contact||24 VDC, 1A resistive|
|CPU Watch Dog||Present|
|Housing||Metal, IP30 protection|
|Dimensions||54 x 142 x 99 mm|
|Weight||Unit Weight: 0.95kg, Shipping Weight: 1.25kg|
|Mounting||DIN-Rail Mounting, Wall Mounting|
|Operating Temperature||STD: -10°C ~ 65°C; EOT: -40°C ~ 75°C|
|Storage Temperature||-40°C ~ 85°C|
|Ambient Relative Humidity||5 to 95%, (non-condensing)|
|EMI||FCC Part 15 Subpart B Class A, CE EN 55022 Class A|
|EMS||IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field)|
|Safety||UL 61010-1, UL61010-2-201|
|Corrosion Protection||IEC 60068-2-11, IEC 60068-2-52, IEC 60068-2-60 IPC-CC-830B, MIL-I-46058C, IEC 61086-2 (Class 2), UL 94, UL 746E ISO 9223 (Class C5-Very High, Class CX-Extreme) ANSI/ISA 71.04 (Class GX-Severe)|
|*All specifications are subject to change without notice.|
There are no inquiries yet.