SAPPHIRE : SUS-5GE
OverviewUnmanaged Non PoE Industrial Switches Enterprise
Gigabit Unmanaged Ethernet Switch -5*10/100/1000Tx
Compact Size for More Practicability and Convenience
AADONA SUS-5GE Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-negotiation ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (12~48V DC or 24V AC).
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the SUS-5GE is specially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission.
Low Power Consumption for Green Networking
The SUS-5GE, adopting the advanced green networking technology, provides the link-on cable length power-saving and link-down power-saving methods. These features make the SUS-5GE consume very low power in full-load operation mode, which helps conserve energy effectively but maintains high performance efficiently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the SUS-5GE can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
Dual Power Input for High Availability Network System
The SUS-5GE features a strong dual-power input system with wide-ranging voltages (12V~48V DC) incorporated into the customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the SUS-5GE via power supply 2 alternatively without any loss of operation.
High Switch Performance
The SUS-5GE offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput and the 8K MAC address table, the SUS-5GE can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the SUS-5GE to provide fast and reliable data transfer.
Plug and Play
All of the RJ45 copper interfaces in the SUS-5GE support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
5-port 10/100/1000Tx Gigabit Ethernet
Redundant Power Input Design, 12-48VDC
Built-in Relay Output Warning for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail Mounting, Wall Mounting
Operating Temperature Range, STD: -10°C ~ 65°C, EOT: -40°C ~ 75°C
Designed for Heavy Industries
The SUS-5GE’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.
|Product Discription||5-Port Industrial Gigabit Unmanaged Ethernet Switch -5*10/100/1000Tx, 12-48VDC Power Input|
|Total No Of Ports||5+0 = 5|
|Warranty||5 Year Warranty Pack|
|Standards||IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT|
|Processing Type||Store and Forward|
|Flow Control||IEEE 802.3x flow control, back pressure flow control|
|Switch Architecture||Back-Plane: Non-Blocking Switching Fabric|
|Transfer Rate||14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port 1,488,000pps for Gigabit Ethernet Port|
|Memory Buffer||1M bits|
|Jumbo Frame||10K bytes|
|MAC Table size||8K|
|RJ45 Ports||5*10/100/1000BaseT(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection|
|LED Indicators||Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting|
|Network Cable||10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m)|
|Power Supply||External Din Rail Industrial Power Supply Unit (Not included & to be purchased seperately)|
|Input Voltage||12-48VDC, Redundant Input|
|Overload Current Protection||Present(Slow-Blown Fuse)|
|Power Connection||1 removable 6-contact terminal block|
|Reverse Polarity Protection||Present|
|Relay Contact||24VDC, 1A resistive|
|Housing||Metal, IP30 protection|
|Dimensions||30 x 140 x 95 mm (W x H x D)|
|Weight||Unit Weight: 0.45kg, Shipping Weight: 0.65kg|
|Mounting||DIN-Rail Mounting, Wall Mounting|
|Operating Temperature||STD: -10°C ~ 65°C (14°F ~ 149°F); EOT: -40°C ~ 75°C (-40°F ~ 167°F)|
|Storage Temperature||-40°C ~ 85°C (-40°F ~ 185°F)|
|Ambient Relative Humidity||5 to 95%, (non-condensing)|
|EMI||FCC Part 15 Subpart B Class A, CE EN 55022 Class A|
|EMS||IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field)|
|Safety||UL 61010-1, UL 61010-2-201, ISA 12.12.01|
|Compliance||NEMA TS2 (ITS) – EoT version|
|*All specifications are subject to change without notice.|
No datasheet url or file uploaded