Fast Ethernet PoE+ Unmanaged Switch – 5*10/100Tx with 4*PoE Ports (120W) + 2*100/1000 SFP Slot
AADONA SUS-5FE2S Industrial 5-Port 10/100TX Compact Ethernet Switch, suitable for industrial use, features 5 10/100Mbps auto-negotiation Ethernet ports and 2 100/1000Mbps SFP ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The SUS-5FE2S is able to operate in any harsh environment with operating temperatures ranging from -40 to 75 degrees C.
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually on demand, the SUS-5FE2S is specially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission.
The SUS-5FE2S, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power-saving methods. These features make the SUS-5FE2S consume very low power in full-load operation mode, which helps conserve energy effectively but maintains high performance efficiently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (IEEE) Protocol, the SUS-5FE2S can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
Dual Power Input for High Availability Network System.
The SUS-5FE2S features a strong dual power input system with wide-ranging voltages (12V~48V DC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the SUS-5FE2S via power supply 2 alternatively without any loss of operation.
The SUS-5FE2S offers a high-performance switch architecture. With the 5 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput and the 8K MAC address table, the SUS-5FE2S can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the SUS-5FE2S to provide fast and reliable data transfer.
All of the RJ45 copper interfaces in the SUS-5FE2S support 10/100Mbps auto-negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical uplink capability guarantees the throughput to all nodes hooked into the network and the Ethernet distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber cable), also the Fast Ethernet distance can be extended from 2km (Multi-Mode fiber cable) up to 20/40/60 kilometers (Single-Mode fiber cable). They are well suited for applications within the factory data centers and distributions.
Suitable for buildings where security is strictly enforced, the SUS-5FP2S, with four Fast Ethernet 802.3at PoE+, in-line power interfaces, can easily build a power that can centrally control an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 4 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the SUS-5FP2S makes the installation of IP cameras or wireless APs easier and more efficient.
The SUS-5FP2S provides four 10/100BASE-TX 802.3at PoE+ ports which can offer sufficient PoE power to 4 PoE IP cameras at the same time. In addition, with the 10/100BASE-TX interfaces, the SUS-5FP2S can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the SUS-5FP2S facilitates the recorded video files from the 4 PoE+ IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The SUS-5FP2S undoubtedly brings an ideal secure surveillance system at a lower total cost.
The SUS-5FP2S Industrial PoE+ Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair.
|Product Discription||Fast Ethernet PoE+ Unmanaged Switch – 5*10/100Tx with 4*PoE Ports (120W) + 2*100/1000 SFP Slot|
|Total Number of Ports||4+1+2=7|
|Warranty||5 Year Warranty Pack|
|Standards||IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3z 1000Base-X Gigabit Fiber
IEEE 802.3af/at Power over Ethernet
|Processing Type||Store and Forward|
|Flow Control||IEEE 802.3x flow control, back pressure flow control|
|Switch Architecture||Back-Plane: Non-Blocking Switching Fabric|
|Transfer Rate||14,880pps for Ethernet Port
148,800pps for Fast Ethernet Port
|MAC Table size||8K|
|RJ45 Ports||5*10/100BaseT(X) with 4* PoE+, auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection|
|PoE Pin Out||V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)|
|Fiber Port||2*100/1000 SFP Slot|
|LED Indicators||Power 1, Power 2, Fault
Ethernet Ports: On-Link/Flash-data transmitting
PoE : On-connected to PD devices
|Wavelength||Depends on SFP modules|
|Network Cable||10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m)
100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
|Input Voltage||48-55 VDC, Redundant Input|
|Overload Current Protection||Present(Slow-Blow Fuse)|
|Power Connection||1 removable 6-contact terminal block|
|Reverse Polarity Protection||Present|
|PoE Power Output||30Watts max. per PoE port|
|Total Power Budget||120 Watt|
|Power Consumption||7.5Watts for System|
|Relay Contact||24VDC, 1A resistive|
|Housing||Metal, IP30 protection|
|Dimensions||30 x 142 x 99 mm (W x H x D)|
|Weight||Unit Weight: 0.55kg, Shipping Weight: 0.75kg|
|Mounting||DIN-Rail Mounting, Wall Mounting|
|Operating Temperature||STD: -10°C ~ 65°C (14°F ~ 149°F); EOT: -40°C ~ 75°C (-40°F ~ 167°F)|
|Storage Temperature||-40°C ~ 85°C (-40°F ~ 185°F)|
|Ambient Relative Humidity||5 to 95%, (non-condensing)|
|EMI||FCC Part 15 Subpart B Class A, CE EN 55022 Class A|
|EMS||IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge),
IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field)
|Safety||UL 61010-1, UL 61010-2-201, ISA 12.12.01|
There are no inquiries yet.