Industrial Switches
SAPPHIRE : SUS-4FP1FE
-
Overview
Unmanaged PoE Industrial Switches Enterprise Fast Ethernet PoE+ Unmanaged Switch – 5*10/100Tx with 4*PoE Ports (120W)
The AADONA SUS-4FP1FE PoE Industrial Ethernet Switch is designed to transmit power and data over single Ethernet cable to remote PoE capable devices and operates reliably in heavy industrial demanding environments.
IEEE 802.3at Power over Ethernet Industrial Switch
PoE feature is more often supported in the industrial Ethernet devices for efficient operation in harsh environments. The SUS-4FP1FE in-line power follows standard IEEE 802.3at and allows giving power to 4 PoE compliant devices at the distance up to 100 meters. With Data and Power over Ethernet from one unit, the SUS-4FP1FE shall reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and (power lowering), the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Furthermore, SUS-4FP1FE switch supports 48-55V DC voltage input and able to provide more wide range of industrial IEEE 802.3at PoE applications.
Wide Temperature conquers installation in harsh environments
The SUS-4FP1FE provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 Degree C, the SUS-4FP1FE can be placed in almost any difficult environment.
Robust Switch performance
The SUS-4FP1FE offers high-performance switch architecture with 5 10/100Mbps UTP ports. It provides non-blocking switch fabric, wire-speed throughput and the 2K MAC Address table. It also performs wire-speed packets transfer without risk of packet loss and the Flow Control function is default enabled to provide fast and reliable data transfer. All of the RJ-45 copper interfaces support 10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 3, 4, 5, 5e or 6 cable. The standard Auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Features
Key Features
4-port 10/100Tx with IEEE 802.3at PoE+Compliance
1-port 10/100Tx Fast Ethernet
Redundant Power Input Design, 48-55VDC
Built-in Relay Output Warning for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail Mounting, Wall Mounting
Operating Temperature Range – STD: -10°C ~ 65°C, EOT: -40°C ~ 75°C
Application
Industrial Area Department/ Workgroup PoE Switch
Providing up to 4 PoE, in-line power interface, theSUS-4FP1FEcan easily build a power centrally-controlled IP phone system, IP surveillance system, and wireless AP group for the enterprise. For instance, 4 camera / AP can be easily installed around the corner of the company for surveillance demands or building a wireless roaming environment in the office. Without the power-socket limitation, the SUS-4FP1FE makes the installation of IP cameras or WLAN AP more easily and efficiently.
Specifications
Basic | |
Product Discription | 5-Port Industrial Fast Ethernet PoE+ Unmanaged Switch – 5*10/100Tx with 4*PoE Ports (30W/Port), 48-55VDC Power Input |
Model Name | SUS-4FP1FE |
Product Family | Sapphire |
Total No Of Ports | 4+1 = 5 |
Warranty | 5 Year Warranty Pack |
Technology | |
Standards | IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3af/at Power over Ethernet |
Processing Type | Store and Forward |
Protocol | CSMA/CD |
Flow Control | IEEE 802.3x flow control, back pressure flow control |
Switch Properties | |
Switch Architecture | Back-Plane: Non-Blocking Switching Fabric |
Transfer Rate | 14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port |
Memory Buffer | 448Kbits |
MAC Table size | 2K |
Interface | |
RJ45 Ports | 5*10/100BaseT(X) with 4* PoE+, auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
PoE Pin Out | V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A) |
LED Indicators | Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting PoE : On-connected to PD devices |
Network Cable | 10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) |
Power Requirements | |
Power Supply | External Din Rail Industrial Power Supply Unit (Not included & to be purchased seperately) |
Input Voltage | 48-55VDC, Redundant Input |
Overload Current Protection | Present(Slow-Blown Fuse) |
Power Connection | 1 removable 6-contact terminal block |
Reverse Polarity Protection | Present |
PoE Power Output | 30Watts max. per PoE port |
Power Consumption | 4Watts for System |
Max. PoE Power Budget | 120Watts |
Relay Contact | 24VDC, 1A resistive |
Mechanical Characteristics | |
Housing | Metal, IP30 protection |
Dimensions | 30 x 142 x 99 mm (W x H x D) |
Weight | Unit Weight: 0.5kg, Shipping Weight: 0.7kg |
Mounting | DIN-Rail Mounting, Wall Mounting |
Environmental Limits | |
Operating Temperature | STD: -10°C ~ 65°C (14°F ~ 149°F); EOT: -40°C ~ 75°C (-40°F ~ 167°F) |
Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) |
Ambient Relative Humidity | 5 to 95%, (non-condensing) |
Regulatory Approvals | |
EMI | FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field) |
Free Fall | IEC60068-2-32 |
Shock | IEC60068-2-27 |
Vibration | IEC60068-2-6 |
Green | RoHS Compliant |
Safety | UL 508, ISA 12.12.01 |
Corrosion Protection | IEC 60068-2-11, IEC 60068-2-52, IEC 60068-2-60 IPC-CC-830B, MIL-I-46058C, IEC 61086-2 (Class 2), UL 94, UL 746E ISO 9223 (Class C5-Very High, Class CX-Extreme) ANSI/ISA 71.04 (Class GX-Severe) |
*All specifications are subject to change without notice. |
Downloads
No datasheet url or file uploaded