SAPPHIRE : SMS-8GE4S
OverviewManaged Non PoE Industrial Switches Enterprise
Gigabit Managed Switch -8*10/100/1000Tx + 4*100/1000 SFP Slots
Environmentally Hardened Design
With IP30 metal industrial case protection, the SMS-8GE4S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. It also possesses an integrated power supply source with wide range of voltage (12 to 48V DC) for worldwide high-availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C, the SMS-8GE4S can be placed in almost any difficult environment.
Redundant Ring, Fast Recovery for Critical Network Applications
The SMS-8GE4S supports redundant ring technology and features the strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and a redundant power input system into the customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 50ms.
Robust Layer2 Features
The SMS-8GE4S can be programmed for advanced switch management functions, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The SMS-8GE4S allows the operation of a high-speed trunk combining multiple ports.
IPv6 / IPv4 Full-functioned Secure Switch for Building Automation Networking
The SMS-8GE4S is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch, especially in the Industrial hardened environment. It supports both IPv4 and IPv6 protocols, advanced Layer 2 to Layer 4 data switching and redundancy, QoS traffic control, network access control and authentication, and Secure Management features to protect customer’s industrial and building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault-tolerant and mesh network architectures.
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The SMS-8GE4S offers IPv4/IPv6 VLAN routing feature which allows to cross-over of different VLANs and different IP addresses for the purpose of having highly-secured, flexible management and simpler networking application.
User-friendly Secure Management
For efficient management, the SMS-8GE4S is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the SMS-8GE4S offers an easy-to-use, platform-independent management and configuration facility. The SMS-8GE4S supports SNMP and it can be managed via any management software based on the standard of SNMP v1 and v2 protocol. For reducing product learning time, the SMS-8GE4S offers Cisco-like commands via Telnet or console port and the customer doesn’t need to learn new commands from these switches. Moreover, the SMS-8GE4S offers remote secure management by supporting SSH, SSL, and SNMP v3 connection which can encrypt the packet content at each session.
Flexible and Extendable Solution
The 4 mini-GBIC slots built in the SMS-8GE4S support dual-speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
8-port 10/100/1000Tx Gigabit Ethernet
4-port 100/1000 SFP Slot
Configuration: Web GUI, Serial Console, CLI Command
Network Redundancy support: G.8032 ERPS, RSTP, MSTP
Supports IGMP v1/v2, up to 256 groups
Supports Storm Protection for Broadcast, Multicast, and Unicast frames
Supports IEEE802.1p QoS and CoS/ToS
Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
System Warning setting for automatic warning through e-mail
Redundant Power Input Design, 12-48VDC
IP30 Rugged Metal Case Design
DIN-Rail Mounting, Wall Mounting
Operating Temperature Range – STD: -10°C ~ 65°C, EOT: -40°C ~ 75°C
FTTx / MAN Edge Switch: To improve the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SMS-8GE4S offers up to 1Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SMS-8GE4S is the ideal solution for service providers such as ISPs and telecoms to build Metropolitan Area Network (MAN) based on the fiber technology.
Security Building Automation Switch: The SMS-8GE4S offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.
|Product Discription||12-Port Industrial Gigabit Managed Ethernet Switch -8*10/100/1000Tx + 4*100/1000 SFP Slot, 12-48VDC Power Input|
|Total No Of Ports||8+4 = 12|
|Warranty||5 Year Warranty Pack|
|Standards||IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT IEEE 802.3z 1000Base-X Gigabit Fiber IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch) IEEE 802.1Q Virtual Local Area Network (VLAN) IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization IEEE 802.1X Network Authentication IEEE 802.1AB Link Layer Discovery Protocol (LLDP)|
|Processing Type||Store and Forward|
|Protocol||CSMA/CD, IGMP v1/v2, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RARP, RMON, Syslog|
|Flow Control||IEEE 802.3x flow control, back pressure flow control|
|MAC Table size||8K Mac Addresses|
|IGMP Group||Up to 256 groups|
|Network Redundancy||STP/RSTP/MSTP, Port Trunk with LACP, ERPS(﹤50ms)|
|Configuration||Web-based, Telnet, Console, Cisco-like CLI, TFTP, SSH, SSL, SNMP v1/v2c/v3, RMON, USB|
|Software Features||Storm Protection for Broadcast, Multicast, and Unicast frames QoS – CoS, ToS/Diffserv mapping, SPQ/WRR queuing 802.1Q Virtual Local Area Network(VLAN) IGMP Snooping, IGMP query DHCP Client/Server/Relay with Option 82 Internet Protocol Version 6 (IPv6) Link Layer Discovery Protocol (LLDP) Port Status, Statistics, Monitoring, Security Port Mirror, LLDP, uPnP, Modbus/TCP|
|Security Features||Static MAC address 802.1X authentication, RADIUS SNMP v3 encrypted authentication and access|
|RJ45 Ports||8*10/100/1000BaseT(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection|
|Fiber Port||4*100/1000 SFP Slot|
|LED Indicators||Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting SFP: Link/Active|
|Wavelength||Depends on SFP modules|
|RS232 Serial Console||1*RS232 in RJ45 connector with console cable, 115.2bps, 8,N,1|
|Configuration Backup||1*USB 2.0 for firmware update, configuration backup/restore/boot up and syslog|
|Network Cable||10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m)|
|Power Supply||External Din Rail Industrial Power Supply Unit (Not included & to be purchased seperately)|
|Input Voltage||12-48VDC, Redundant Input|
|Overload Current Protection||Present(Slow-Blown Fuse)|
|Power Connection||1 removable 6-contact terminal block|
|Reverse Polarity Protection||Present|
|Power Consumption||15 Watts for System|
|Relay Contact||24 VDC, 1A resistive|
|CPU Watch Dog||Present|
|Housing||Metal, IP30 protection|
|Dimensions||54 x 142 x 99 mm|
|Weight||Unit Weight: 0.9kg, Shipping Weight: 1.2kg|
|Mounting||DIN-Rail Mounting, Wall Mounting|
|Operating Temperature||STD: -10°C ~ 65°C; EOT: -40°C ~ 75°C|
|Storage Temperature||-40°C ~ 85°C|
|Ambient Relative Humidity||5 to 95%, (non-condensing)|
|EMI||FCC Part 15 Subpart B Class A, CE EN 55022 Class A|
|EMS||IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field)|
|Safety||UL 61010-1, UL61010-2-201|
|Compliance||NEMA TS2 (ITS)-EoT version|
|*All specifications are subject to change without notice.|
No datasheet url or file uploaded