Industrial Switches
SAPPHIRE : SMS-5GP2S-T
-
Overview
Managed PoE Industrial Switches Enterprise -
Enterprise Gigabit PoE+ Managed True Industrial Switch -4*10/100/1000Tx PoE (120W) + 1*10/100/1000Tx + 2*100/1000 SFP Slots
Environmentally Hardened Design
AADONA Industrial 7-Port Gigabit 802.3at PoE+ Switch, SMS-5GP2S-T, is equipped with a rugged IP30 metal case for stable operation in heavy Industrial demanding environments.
Redundant Ring, Fast Recovery for Surveillance System
The
SMS-5GP2S-T supports redundant ring technology and features strong
rapid self-recovery capability to prevent interruptions and external
intrusions. It incorporates advanced Redundant Ring technology, Spanning
Tree Protocol (802.1w RSTP), and a redundant power supply system into
the customer’s industrial automation network to enhance system reliability
and uptime in harsh factory environments. The SMS-5GP2S-T also protects
the customer’s industrial network connectivity with a switching recovery
capability that is used for implementing fault-tolerant ring and mesh
network architectures. If the Industrial network was interrupted
accidentally, the fault recovery times could be less than 50ms to
quickly bring the network back to normal operation.
High Power PoE for Security and Public Service Applications
To
fulfill the demand of High Power PoE for network applications with
Gigabit speed transmission under wide temperature, the SMS-5GP2S-T
provides 4 10/100/1000Mbps ports featuring IEEE 802.3at Power over
Ethernet Plus (PoE+) that combines up to 120-watt power output and data
per port over one Cat.5E/6 Ethernet cable. With a total 120-watt PoE
budget on the whole system, the SMS-5GP2S-T is designed specifically to
satisfy the growing demand of higher power-consuming network PDs
(powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network
cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and
other PoE network devices by providing PoE power, doubling that of the
current conventional 802.3af PoE.
Intelligent Alive Check for Powered Device
The
SMS-5GP2S-T PoE Switch can be configured to monitor the connected PD’s
status in real-time via ping action. Once the PD stops working and
responding, the SMS-5GP2S-T will recycle the PoE port power and bring
the PD back to work. It also greatly enhances the reliability owing that
the PoE port will reset the PD power, thus reducing the administrator’s
management burden.
PoE Schedule for Energy Saving
Under
the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the SMS-5GP2S-T can effectively control the
power supply besides its capability of giving high watts power. The
built-in ‘PoE schedule’ function helps you to enable or disable PoE
power feeding for each PoE port during specified time intervals and it
is a powerful function to help SMBs or enterprises save power and money.
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
To
help customers stay on top of their businesses, the SMS-5GP2S-T provides not only ultra-high transmission performance and excellent Layer 2 technologies but also IPv4/IPv6 software VLAN routing feature which
allows to crossover different VLANs and different IP addresses for the
purpose of having highly-secured, flexible management and simpler
networking application.
Robust Layer 2 Features
The
SMS-5GP2S-T can be programmed for advanced switch management functions
such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid
Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and
IGMP snooping. The SMS-5GP2S-T provides 802.1Q tagged VLAN. Via
aggregation of supporting ports, the SMS-5GP2S-T allows the operation of
a high-speed trunk combining multiple ports and supports fail-over as
well.
Efficient Management
The SMS-5GP2S-T Managed Ethernet Switch is equipped with console, Web and SNMP management interfaces for efficient management. With the built-in Web-based
management interface, the SMS-5GP2S-T offers an easy-to-use,
platform-independent management and configuration facility. For
text-based management, the SMS-5GP2S-T can be accessed via Telnet and
the console port. Moreover, it also offers secure remote management via
any standard-based management software by supporting SNMPv3 connection
which encrypts the packet content at each session.
Powerful Security
The
SMS-5GP2S-T offers a comprehensive Layer 2 to Layer 4 Access Control List
(ACL) for enforcing security to the edge. It can be used to restrict
network access by denying packets based on source and destination IP
address, TCP/UDP ports or defined typical network applications. Its
protection mechanism also comprises 802.1x Port-based and MAC-based user
and device authentication. With the private VLAN function,
communication between edge ports can be prevented to ensure user
privacy. The network administrators can now construct highly-secured
corporate networks with considerably less time and effort than before.
Flexibility and Extension Solution
The
two mini-GBIC slots built in the SMS-5GP2S-T support dual speed,
100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable)
fiber-optic modules, meaning the administrator now can flexibly choose
the suitable SFP transceiver according to not only the transmission
distance but also the transmission speed required. The distance can be
extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers
(single-mode fiber or WDM fiber). They are well suited for applications
within the enterprise data centers and distributions.
Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
The SMS-5GP2S-T provides 4 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 4 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the SMS-5GP2S-T can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high-performance switch architecture, the SMS-5GP2S-T facilitates the recorded video files from the 4 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The SMS-5GP2S-T undoubtedly brings an ideal secure surveillance system at a lower total cost.Features
- 4-port 10/100/1000Tx Ethernet with IEEE 802.3at Compliant PoE+
- 1-port 10/100/1000Tx Ethernet
- 2-port 100/1000 SFP Slot
- Configuration: Web GUI, Serial Console, CLI Command
- Network Redundancy support: G.8032 ERPS, RSTP, MSTP
- Supports IGMP v1/v2, up to 256 groups
- Supports Storm Protection for Broadcast, Multicast, and Unicast frames
- Supports IEEE802.1p QoS and CoS/ToS
- Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
- PoE Ping Alarm function for PoE ports power recycle
- System Warning setting for automatic warning through e-mail
- Redundant Power Input Design, 48-55VDC
- IP30 Rugged Metal Case Design
- DIN-Rail Mounting, Wall Mounting
- Operating Temperature Range - -40°C ~ 75°C
Applications
Industrial Area Department/Workgroup PoE Switch Providing up to 4 PoE+, in-line power interfaces, the SMS-5GP2S-T can easily build a power centrally controlled by IP phone system, IP camera system, or wireless AP group for an Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the SMS-5GP2S-T makes the installation of IP cameras or wireless AP easier and more efficient. With IEEE 802.3at Power over Ethernet Plus standard, the SMS-5GP2S-T can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high-speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for travelers.
Specifications
Basic | |
Product Description | 7-Port Industrial Gigabit PoE+ Managed Ethernet Switch -4*10/100/1000Tx with PoE Injector (30W/Port) + 1*10/100/1000Tx + 2*100/1000 SFP Slot, 48-55VDC Power Input |
Model Name | SMS-5GP2S-T |
Product Family | Sapphire |
Total No Of Ports | 5+2 = 7 |
Warranty | 3 default +2 extended, Total 5-Year Warranty Pack |
Technology | |
Standards | IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT IEEE 802.3z 1000Base-X Gigabit Fiber IEEE 802.3af/at Power over Ethernet IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch) IEEE 802.1Q Virtual Local Area Network (VLAN) IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization IEEE 802.1X Network Authentication IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 803.3ad Link Aggregation (LACP), IEEE 802.1ax |
Processing Type | Store and Forward |
Protocol | CSMA/CD, IGMP v1/v2, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RARP, RMON, Syslog, ULDP (like Cisco UDLD) or equivalent |
Flow Control | IEEE 802.3x flow control, back pressure flow control |
Switch Properties | |
Switching Fabric | 14Gbps |
Priority Queues | 8 |
Max VLANs | 4095 |
Memory Buffer | 4Mbits |
Jumbo Frame | 9.6Kbytes |
MAC Table size | 8K Mac Addresses |
IGMP Group | Up to 1024 groups |
Network Management | |
Network Redundancy | STP/RSTP/MSTP, Port Trunk with LACP, ERPS(﹤50ms) |
Configuration | Web-based, Telnet, Console, Cisco-like CLI, TFTP, SSH, SSL, SNMP v1/v2c/v3, RMON, USB |
Software Features | Storm Protection for Broadcast, Multicast, and Unicast frames QoS – CoS, ToS/Diffserv mapping, SPQ/WRR queuing 802.1Q Virtual Local Area Network(VLAN) IGMP Snooping, DHCP snooping, DHCP Client/Server/Relay with Option 82 Internet Protocol Version 6 (IPv6) Link Layer Discovery Protocol (LLDP) Port Status, Statistics, Monitoring, Security PoE Status, Monitoring, Ping Alarm, Scheduling Port Mirror, LLDP, uPnP, Modbus/TCP, BPDU protection |
Security Features | Static MAC address 802.1X authentication, RADIUS, TACACS+ encrypted authentication and access |
Interface | |
RJ45 Ports | 5*10/100/1000BaseT(X) with 4* PoE+, auto-negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
PoE Pin Out | V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A) |
Fiber Port | 2*100/1000 SFP Slot |
LED Indicators | Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting PoE: On-connected to PD devices SFP: Link/Active |
Wavelength | Depends on SFP modules |
RS232 Serial Console | 1*RS232 in RJ45 connector with console cable, 115.2bps, 8,N,1 |
Configuration Backup | 1*USB 2.0 for firmware update, configuration backup/restore/boot up and Syslog |
Network Cable | 10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m) |
Power Requirements | |
Power Supply | External Din-Rail Industrial Power Supply Unit (Not included & to be purchased separately) |
Input Voltage | 48-55VDC, Redundant Input |
Overload Current Protection | Present(Slow-Blown Fuse) |
Power Connection | 1 removable 6-contact terminal block |
Reverse Polarity Protection | Present |
PoE Power Output | 30W max. per PoE port |
Power Consumption | 7.5 Watts for System |
Max. PoE Power Budget | 120W |
Relay Contact | 24 VDC, 1A resistive |
Protection | |
CPU Watch Dog | Present |
Mechanical Characteristics | |
Housing | Metal, IP30 protection |
Dimensions | 54 x 142 x 99 mm |
Weight | Unit Weight: 0.95kg, Shipping Weight: 1.25kg |
Mounting | DIN-Rail Mounting, Wall Mounting |
Environmental Limits | |
Operating Temperature | -40°C ~ 75°C |
Storage Temperature | -40°C ~ 85°C |
Ambient Relative Humidity | 5 to 95%, (non-condensing) |
Regulatory Approvals | |
Safety and Certifications |
CE, EN, LVD, RoHS EN61000-4-5 (for RJ45 Port, Surge 6KV) EN 55032:2015 EN 55024:2010+A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 60950-1:2006 ISO Standard- ISO 9001:2015 ISO 14001:2015 ISO 27001:2013 |
*All specifications are subject to change without notice. |