Rugged Switch
SAPPHIRE : SML-8GP-2S-PW
-
Overview
Managed PoE Rugged Switch Enterprise -
Gigabit PoE+ Managed Switch -8*10/100/1000Tx PoE (240W) + 2*100/1000 SFP Slots
Environmentally Hardened Design
AADONA SAPPHIRE series Industrial 10-Port Gigabit 802.3at PoE+ Switch, SML-8GP-2S-PW, is equipped with a rugged IP40 metal case for stable operation in heavy Industrial demanding environments.
Redundant Ring, Fast Recovery for Surveillance System
The SML-8GP-2S-PW supports redundant ring technology and features a strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The SML-8GP-2S-PW also protects customers’ industrial network connectivity with a switching recovery capability that is used for implementing fault-tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
High Power PoE for Security and Public Service Applications
To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperatures, the SML-8GP-2S-PW provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 240-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 240-watt PoE budget on the whole system, the SML-8GP-2S-PW is designed specifically to satisfy the growing demand for higher power-consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network devices by providing PoE power, doubling that of the current conventional 802.3af PoE.
Intelligent Alive Check for Powered Device
The SML-8GP-2S-PW PoE Switch can be configured to monitor the connected PD’s status in real time via ping action. Once the PD stops working and responding, the SML-8GP-2S-PW will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability owing that the PoE port will reset the PD power, thus reducing the administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the SML-8GP-2S-PW can effectively control the power supply besides its capability of giving high watts of power. The built-in ‘PoE schedule’ function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Robust Layer 2 Features
The SML-8GP-2S-PW can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control, and IGMP snooping. The SML-8GP-2S-PW provides 802.1Q tagged VLAN. Via aggregation of supporting ports, the SML-8GP-2S-PW allows the operation of a high-speed trunk combining multiple ports and supports fail-over as well.
Efficient Management
For efficient management, the SML-8GP-2S-PW Managed Ethernet Switch is equipped with console, Web, and SNMP management interfaces. With the built-in Web-based management interface, the SML-8GP-2S-PW offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the SML-8GP-2S-PW can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting an SNMPv3 connection which encrypts the packet content at each session.
Powerful Security
The SML-8GP-2S-PW offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports, or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. Network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the SML-8GP-2S-PW support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well-suited for applications within enterprise data centers and distributions.
Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
The SML-8GP-2S-PW provides 8 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the SML-8GP-2S-PW can connect to the core fiber switch and send the video stream to NVR and the monitoring center. Through the high-performance switch architecture, the SML-8GP-2S-PW facilitates the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both on the local LAN and the remote site via the Internet. The SML-8GP-2S-PW undoubtedly brings an ideal secure surveillance system at a lower total cost.
Features
8-port 10/100/1000Tx Ethernet with IEEE 802.3at Compliant PoE+
2-port 100/1000 SFP Slot
Total PoE budget 240W
Configuration: Web GUI, Serial Console, CLI Command
Network Redundancy support: G.8032 ERPS, RSTP, MSTP
Supports IGMP v1/v2, up to 256 groups
Supports Storm Protection for Broadcast, Multicast, and Unicast frames
Supports IEEE802.1p QoS and CoS/ToS
Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
PoE Ping Alarm function for PoE ports power recycle
System Warning setting for automatic warning through e-mail
2*Independent Power Input, 12-57VDC
IP40 Rugged Metal Case Design
DIN-Rail Mounting, Wall Mounting
Operating Temperature Range – STD: -10°C ~ 65°C, EOT: -40°C ~ 85°C
Applications
Industrial Area Department/Workgroup PoE Switch
Providing up to 8 PoE+, in-line power interfaces, the SML-8GP-2S-PW can easily build a power centrally controlled by an IP phone system, IP camera system, or wireless AP group for an Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the SML-8GP-2S-PW makes the installation of IP cameras or wireless AP easier and more efficient.
With IEEE 802.3at Power over Ethernet Plus standard, the SML-8GP-2S-PW can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high-speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for travelers.
Specifications
| Basic | |
| Product Description | 8-Port Industrial Gigabit PoE+ Managed Ethernet Switch -8*10/100/1000Tx with PoE Injector (30W/Port) + 2*100/1000 SFP Slot |
| Model Name | SML-8GP-2S-PW |
| Product Family | Sapphire |
| Total No Of Ports | 8+2 = 10 |
| Warranty | 3 Year Warranty Pack |
| Technology | |
| Standards | IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT IEEE 802.3z 1000Base-X Gigabit Fiber IEEE 802.3af/at Power over Ethernet IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch) IEEE 802.1Q Virtual Local Area Network (VLAN) IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization IEEE 802.1X Network Authentication IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 803.3ad Link Aggregation (LACP) |
| Processing Type | Store and Forward |
| Protocol | CSMA/CD, IGMP v1/v2, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RARP, RMON, Syslog |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Switch Properties | |
| Switching Fabric | 20Gbps |
| Priority Queues | 8 |
| Max VLANs | 4095 |
| Memory Buffer | 4Mbits |
| Jumbo Frame | 9.6Kbytes |
| MAC Table size | 8K Mac Addresses |
| IGMP Group | Up to 1024 groups |
| Network Management | |
| Network Redundancy | STP/RSTP/MSTP, Port Trunk with LACP, ERPS(﹤50ms) |
| Configuration | Web-based, Telnet, Console, Cisco-like CLI, TFTP, SSH, SSL, SNMP v1/v2c/v3, RMON, USB |
| Software Features | Storm Protection for Broadcast, Multicast, and Unicast frames QoS – CoS, ToS/Diffserv mapping, SPQ/WRR queuing 802.1Q Virtual Local Area Network(VLAN) IGMP Snooping, IGMP query DHCP Client/Server/Relay with Option 82 Internet Protocol Version 6 (IPv6) Link Layer Discovery Protocol (LLDP) Port Status, Statistics, Monitoring, Security PoE Status, Monitoring, Ping Alarm, Scheduling Port Mirror, LLDP, uPnP, Modbus/TCP, L3 Static Routing |
| Security Features | Static MAC address 802.1X authentication, RADIUS SNMP v3 encrypted authentication, and access |
| Interface | |
| RJ45 Ports | 8*10/100/1000BaseT(X) with 8* PoE+, auto-negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| PoE Pin Out | V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A) |
| Fiber Port | 2*100/1000 SFP Slot |
| LED Indicators | Power 1, Power 2, Fault Ethernet Ports: On-Link/Flash-data transmitting PoE: On-connected to PD devices SFP: Link/Active |
| Wavelength | Depends on SFP modules |
| RS232 Serial Console | 1*RS232 in RJ45 connector with console cable, 115.2bps, 8,N,1 |
| Configuration Backup | Configuration backup/restore/boot up and Syslog |
| Network Cable | 10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100BaseTX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m) |
| Power Requirements | |
| Power Supply | External Din-Rail Industrial Power Supply Unit (Not included & to be purchased separately) |
| Input Voltage | 12-57VDC, 2*independent power input |
| Overload Current Protection | Present(Slow-Blown Fuse) |
| Power Connection | 1 removable 6-contact terminal block |
| Reverse Polarity Protection | Present |
| PoE Power Output | 30W max. per PoE port |
| Power Consumption | <15 Watts for System |
| Max. PoE Power Budget | 240W |
| Relay Contact | 24 VDC, 1A resistive |
| Protection | |
| CPU Watch Dog | Present |
| Mechanical Characteristics | |
| Housing | Metal, IP40 protection |
| Dimensions | 179 x 134 x 46 mm |
| Weight | Unit Weight: 0.95kg, Shipping Weight: 1.25kg |
| Mounting | DIN-Rail Mounting, Wall Mounting |
| Environmental Limits | |
| Operating Temperature | STD: -10°C ~ 65°C; EOT: -40°C ~ 85°C |
| Storage Temperature | -40°C ~ 95°C |
| Ambient Relative Humidity | 5 to 95%, (non-condensing) |
| Regulatory Approvals | |
| Safety and Certifications |
CE, EN, LVD, RoHS EN61000-4-5 (for RJ45 Port, Surge 6KV) EN 55032:2015 EN 55024:2010 + A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 60950 – 1:2006 |
| *All specifications are subject to change without notice. | |
