DIANA : DUS-4EP-2E
OverviewUnmanaged PoE Switches Network Switch SMB
4 Port 10/100Mbps + 2 Port 10/100Mbps Uplink, Supports 250 Meters with 80W PoE, Smart AI
The DUS-4EP-2E is a 10/100Mbps unmanaged POE switch, which provides four DATA+POE ports and two data ports for uplink.
Diana DUS-4EP-2E is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission. The switch supports Smart AI technology which detects non-responsive PoE devices and reboots them for recovery with a power cycle.
DUS-4EP-2E adopts a plug-and-play design, which eliminates the need for software configuration, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy transition between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other but transmit output data only through ports 5-6. This mode can effectively suppress the generation of broadcast storms.
Intelligent detection, support active and passive 48V POE devices.
Dynamic power ensures stable and reliable output power.
Anti–collinear interference to solve grounding installation problem.
Start up in an orderly way to reduce the current shock effectively.
Reliable short circuit protection, safe and reliable.
Overvoltage undervoltage protection.
Complies with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3q, 802.3af/at specifications.
2*10/100Mbps uplink ports, support for auto-negotiation.
4*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
PoE power budget 80w.
Ideal for small installations of 4 PoE devices (IP phone, wired surveillance camera, wireless access point)
Smart AI to detect non-responsive PoE devices and reboot them for recovery with a power cycle.
Store-and-Forward transmission mode.
Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
Plug-and-play, simple setup with no software or configuration needed
Quiet operation, energy efficiency and sturdy metal case for anywhere quality installation
2K Mac address table
One DIP switch supports port isolation setting and max 250m POE transmission（CCTV mode)
Port status LEDs
|Product Description||4 Port 10/100Mbps + 2 Port 10/100Mbps Uplink Port, Supports 250 Meters with 80W PoE, Smart AI|
|Warranty||2 Year + 1 Year Extended Warranty (Max 3 Year)|
|10M/100M RJ45 Port||4|
|10M/100M Uplink RJ45 Port||2|
|Exchange Mechanism||Store & Forward|
|Operating Temperature||Working Temperature:0-45℃|
|Operating Humidity||10%-90% RH non-condensing|
|Storage Temperature||Storage temperature: -40-+70℃|
|Storage Humidity||5%-90% RH non-condensing|
|Dimensions (H) x (W) x (D) mm||190mm*130mm*32mm|
|AC Input||AC input 100~240V 50~60Hz internal power supply|
|Maximum POE Budget||80W|
|Smart AI for PoE devices||Y|
|IEEE 802.3i 10BASE-TX||Y|
|IEEE 802.3u 100BASE-TX||Y|
|IEEE 802.3af /IEEE 802.3at||Y|
|IEEE 802.3x Flow control||Y|
|Normal Mode||100 meters|
|CCVT or Extended Mode||250 meters|
|Port Based VLAN||Y|
|Ethernet 10Mbps half-duplex, 20Mbps full-duplex||Y|
|Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex||Y|
|10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤100m)||Y|
|100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤100m)||Y|
|*All specifications are subject to change without notice.|
No datasheet url or file uploaded