Network Switch


The DUS-24EPP-2G is a gigabit uplink 10/100Mbps unmanaged POE switch, which provides 24 DATA+POE ports and two pure data 10/100/1000Mbps RJ45 ports.

Ports 1-24 follow the 802.3af/at standard and support maximum power output of 30w per port. The POE ports of the switch can automatically detect and supply power to the PD devices that comply with the 802.3af/at standard. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, and 100Mbps.

The DUS-24EPP-2G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.

The DUS-24EPP-2G adopts a plug-and-play design, which eliminates the need for software configuration, and greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy transition between shared or port isolation modes. This mode can effectively suppress the generation of broadcast storms.

    Intelligent detection, support active 48V POE device.
    Dynamic power ensures stable and reliable output power.
    Anti–collinear interference to solve grounding installation problems.
    Start up in an orderly way to reduce the current shock effectively.
    Reliable short circuit protection, safe and reliable.
    Overvoltage undervoltage protection.

Read More


    Complies with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3q, 802.3ab, 802.3af/at specifications.
    2*10/100/1000Mbps uplink ports, support for auto-negotiation.
    24*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
    PoE power budget 370W.
    Ideal for installations of 24 PoE devices (IP phone, wired surveillance camera, wireless access point).
    Store-and-Forward transmission mode.
    Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
    Plug-and-play, simple setup with no software or configuration needed.
    Quiet operation, energy-efficient and sturdy metal case for an anywhere quality installation.
    8K Mac address table.
    Support 9k jumbo frames.
    One DIP switch supports port isolation setting and a max 250m POE transmission(CCTV mode).
    Port status LEDs.


Product Description 24 Port 10/100 + 2G Uplink Ports Unmanaged 370W POE Switch, Supports 250 Meters
Model Name DUS-24EPP-2G
Product Family Diana
Warranty 2 Year + 1 Year Extended Warranty (Max 3 Year)
Port Configuration
10M/100M RJ45 Port 24
10M/100M/1000M Uplink RJ45 Port 2
10M/100M/1000M SFP Uplink Port
Total Ports 26
HW Performance
Switching Bandwidth 16 Gbps
Packet Forwarding 9.21 Mpps
Exchange Mechanism Store & Forward
MAC Address 8K
Environmental Specification
Operating Temperature -10 to + 55℃
Operating Humidity 5%~90% RH Non-condensing
Storage Temperature -40℃ to +75℃
Storage Humidity 5%~95% RH Non-condensing
Mechanical Specification
Dimensions (H) x (W) x (D) mm 440mm*290mm*45mm
Weight 3.5kg
FAN Less Y
Power Source
AC Input AC input 100~240V 50~60Hz Internal Power Supply
IEEE802.3af/at Y
Maximum POE Budget 370W
Network protocol
IEEE 802.3X Y
IEEE 802.3i 10BASE-TX Y
IEEE 802.3u 100BASE-TX Y
IEEE 802.3ab 1000BASE-T Y
IEEE 802.3af /IEEE 802.3at Y
IEEE 802.3x Flow control Y
Normal Mode 100 meters
CCVT or Extended Mode 250 meters
Port-Based VLAN / Port Isolation Y
Ethernet 10Mbps half-duplex, 20Mbps full-duplex Y
Fast Ethernet 100Mbps half-duplex, 200Mbps full-duplex Y
Gigabit Ethernet 1000Mbps half-duplex, 2000Mbps full-duplex Y
Network Media
10BASE-T : Cat3,4,5 UTP(≤250 meter) Y
100BASE-TX : Cat5 or later UTP(150 meter) Y
1000BASE-TX : Cat6 or later UTP(150 meter) Y
Safety Regulations
Lightning Protection Level 3KV 8/20us; IP30
RoHS Compliant Y
CE/LVD EN60950 Y
*All specifications are subject to change without notice.


No datasheet url or file uploaded