L3 Enterprise Wireless Controller for max 128 APs

  Ask a Question


The AWM-6000 is a smart appliance-type access controller (AC) developed by AADONA for Apollo Series Enterprise Access Points, it serves for small and medium wireless networks and large enterprise branches. It can combine with AADONA smart wireless access points (APs) to form a centrally managed wireless LAN (WLAN) solution.

The AWM-6000 supports two 10/100/1000Base-T electrical ports, and can manage up to 128 smart wireless APs. The device provides strong WLAN access control through systems such as precise user control and management, complete RF management and security mechanism, powerful QoS, seamless roaming, and authentication based on existing networks.

Underpinned by a smart cluster management technology, the solution automatically adjusts AP power and channels by monitoring and controlling the RF environment of each AP in real time, and balances loads based on the number of users or traffic to minimize interference to wireless signals and stabilize wireless network loads.

Powered by AADONA cutting-edge IPv6 technology, the AWM-6000 is designed with full IPv6 compatibility. The device supports a broad range of static routing protocols including RIP, OSPF, BGP and PIM, as well as dynamic routing protocols such as IPv6 RIPng, OSPFv3 and PIM6.

A rich service array coupled with considerable cost efficiency positions the AWM-6000 as a wireless AC preferred for small and medium networks as well as large enterprise branches.


High-Performance and High-Reliability Wireless Network
More flexible data forwarding The AWM-6000 may be deployed on a Layer 2 (L2) or Layer 3 (L3) network without changing existing network architecture. Boasting of a local forwarding technology, the AWM-6000 has thoroughly broken through the traffic bottleneck of wireless ACs. The local forwarding technology enables delay-sensitive data with high real-time transmission requirements to be forwarded through the wired network. In the 802.11n high traffic throughput scenario, this greatly alleviates the traffic pressure on the wireless AC and better meets higher traffic transmission requirements of future wireless networks, such as high-definition Video on Demand (VoD) and Voice over WLAN (VoWLAN) transmission.
High-reliability backup mechanism The AWM-6000 supports the following high-reliability backup mechanisms to ensure that a wireless network runs reliably:

1. 1+1 fast backup

2. N+1 backup

3. N+N backup

4. Portal 1+1 backup

5. DHCP server hot backup

Automatic emergency mechanism of APs In a centralized network architecture where thin APs and a wireless AC are deployed, the APs will be unable to operate normally when the wireless AC is down and then the entire wireless network will crash. AADONA wireless APs support an automatic emergency mechanism. This mechanism enables an AP to intelligently detect links. When detecting that the wireless AC is down, the AP quickly switches its operating mode so that it may continue to forward data while enabling new users to access the network. This mechanism attains high availability in the entire wireless network and really helps wireless users to be always online.
Dual-OS backup mechanism The AWM-6000 supports a dual-OS backup mechanism. When the AWM-6000 fails to start from the active OS, it can immediately start from a standby OS, thereby improving the long-term running reliability of equipment in an adverse environment.
Wireless Network of Intelligent Control and Automatic Perception
Intelligent RF management The AWM-6000 provides an automatic power and channel adjustment function. It employs particular RF detection and management algorithms to attain a better RF coverage effect. When the signals of an AP are interfered by strong external signals, the AP may automatically switch to an appropriate operating channel under the control of the AC to avoid such interference, thereby guaranteeing wireless network communications. The system also supports wireless network blackhole compensation. When an AP on the network accidentally stops operating, the RF management function of the AC compensates the resulting blind area of signals so that the wireless network can still operate normally.
Intelligent control of terminals based on airtime fairness When some outdated 802.11b and 802.11g terminals are used on a wireless network or some terminals are far away from APs, negotiation rates will be low, causing a large number of users to experience a long WLAN access delay, low rates, or poor overall AP performance. The AP performance problem in a low-rate terminal access environment, however, cannot be resolved by simply employing rate control and traffic shaping. AADONA smart APs have essentially resolved this problem by using intelligent control of terminals based on airtime fairness, ensuring that a user can always enjoy the same joyful WLAN experience in the same location, no matter what type of terminal the user is holding. The intelligent control of terminals based on airtime fairness greatly improves the performance of both the client and the entire network. It enables all clients with high data transmission rates to attain strikingly higher performance while low-rate clients are almost not affected at all. The performance will be even more obviously higher on an open wireless network. Once high-rate clients finish data transmission, fewer clients will be transmitting data on the wireless network. In this case, there will be less contention and retry on the network, thereby greatly improving overall AP performance.
Intelligent load balancing mechanism In general, a wireless client will select an AP according to the signal strength of APs. When this uncontrolled access mode is applied, however, a large number of clients could be connected to the same AP simply because the AP provides strong signals. As more clients are connected to an AP, the bandwidth available to each client will be smaller, thereby greatly affecting user experience of the clients. AADONA wireless products support diversified intelligent load balancing means:

1. AP load balancing based on traffic

2. AP load balancing based on the number of users

3. AP load balancing based on frequency bands

4. Access control based on signal strength of terminals

5. Mandatory roaming control of terminals to direct terminals to APs with stronger signals

Intelligent identification of terminals AADONA wireless ACs may combine with AADONA smart APs and a unified authentication platform to intelligently identify the size, system type, and type of each terminal; and comprehensively support mainstream smart terminal operating systems, such as Apple iOS, Android, and Windows. They intelligently identify the size of a terminal and adaptively present a portal authentication page of the corresponding size and page pattern, freeing users from multiple times of dragging to adjust the screen and enabling users to enjoy an intelligent wireless experience. They can also intelligently identify the system type of each terminal and present the system type of each terminal such as Windows, MAC OS, or Android on the unified authentication platform, exhibiting every detail of intelligence to users. In addition, they can intelligently identify the type of each terminal such as the mobile phone, tablet, or PC, and implement dynamic policy control of terminals according to different types of the terminals, making possible more intelligent user control at a finer granularity.
Comprehensive support for IPv4/v6 dual-stack networks Powered by AADONA cutting-edge IPv6 technology, the AWM-6000 may be deployed on an IPv6 network.
Network-wide seamless roaming The AWM-6000 supports an advanced wireless AC cluster technology. This technology enables multiple AWM-6000 devices to synchronize online connection information and roaming records of all users with one another in real-time. This technology implements not only L2 seamless roaming inside a wireless AC but also fast roaming across wireless ACs. As client IP address information does not change and re-authentication is not required in the roaming process, the continuity of real-time mobile services is well guaranteed.
Secure and Controllable Wireless Network
User isolation policy The AWM-6000 supports the isolation of wireless users from one another. If this user isolation function is enabled, two wireless clients cannot directly communicate with each other but can only access an upstream wired network. This further guarantees the security of wireless network applications.
Wireless intrusion detection and intrusion defense The AWM-6000 supports wireless intrusion detection and intrusion defense features, such as detection of unauthorized wireless devices, intrusion detection, blacklist, and white list, as well as anti-DoS for various wireless management packets, thereby greatly improving security management of an entire wireless network.
Wireless user management at a fine granularity Under the management of the AWM-6000, each AP supports a maximum of 32 WLANs to implement multi-layer multi-service management of wireless users at a fine granularity. Each WLAN supports access control and uplink/downlink rate limit based on MAC or IP addresses. These WLANs may be bound to VLANs. In addition, different authentication and accounting policies can be implemented. This feature is practically significant in a multi-WLAN environment.
Operational-level permission management mechanism An SSID-based user permission management mechanism enables a network to be divided into multiple virtual wireless networks based on multiple SSIDs according to actual application requirements. This mechanism sets specific management and viewing permissions for specific users, so that users are completely isolated from one another in terms of operation and management.
Secure user admission The AWM-6000 provides multiple secure access, authentication, and accounting mechanisms for various application environments. These mechanisms include:

1. 802.1x authentication

2. Captive portal authentication, including built-in portal, external portal, and custom portal authentication modes

3. MAC address authentication

4. LDAP authentication

5. WAPI encryption and authentication

6. Wired/wireless integrated authentication and accounting

Wireless SAVI AADONA wireless network products support a source address validation (SAVI) technology to deal with spoofed packet attacks that keep emerging on today’s campus networks. As users’ IP addresses are obtained through an address allocation protocol, users access the Internet using correct addresses in subsequent applications and cannot spoof others’ IP addresses, thereby guaranteeing the reliability of source addresses. In addition, the SAVI technology is combined with a portal technology to further guarantee the authenticity and security of packets of all users accessing the Internet.
PEAP user authentication With the popularization and application of smart terminals, wireless terminal users require authentication mechanisms of higher usability and convenience. Using a mechanism that combines portal authentication and MAC address authentication, AADONA wireless network products support Protected Extensible Authentication Protocol (PEAP) authentication to attain better user experience. Initially, a user needs to manually perform portal authentication and later the user gets authenticated through PEAP in automatic mode. AADONA wireless network products feature high terminal adaptation and provide good authentication compatibility. They adapt to the majority of WLAN terminals and do not need to adapt to clients. AADONA wireless network products are compatible with existing portal authentication modes.
Secure access mechanism of APs An AP is usually deployed in a public area and therefore requires a strict security mechanism to guarantee the legality of access devices. The following secure access mechanisms may be applied between an AADONA wireless AC and a smart AP:

1. AP MAC address authentication

2. AP password authentication

3. Bidirectional digital certificate authentication

Real-time spectrum protection AADONA smart APs support a built-in RF collection module that integrates RF monitoring and real-time spectrum protection. By implementing communications and data collection through the respective AP, the RF collection module performs wireless environment quality monitoring, wireless network capability tendency evaluation, and unexpected-interference alarms. It resorts to a graphical means to actively detect and identify RF interference sources (Wi-Fi or non-Wi-Fi) and provides a real-time spectrum analysis diagram. In addition, it can automatically identify interference sources and determine the locations of problematic wireless devices, ensuring that a wireless network attains optimal performance.
Easy-to-Manage Wireless Network
AP plug-and-play The AWM-6000 smart AC can be seamlessly integrated with existing switches, firewalls, authentication servers, and other network devices. AADONA smart APs are able to automatically discover the AWM-6000. A wireless network function can be enabled on an AP without performing any configuration on the AP at all. When used with the AWM-6000, AADONA smart APs support plug-and-play, and zero configuration. The wireless AC undertakes all the management, control, and configuration of the APs. Network administrators do not need to separately manage or maintain a huge number of wireless APs. All actions, such as configuration, firmware upgrade, and security policy updating, are performed uniformly under the control of the wireless AC.
Remote probe analysis The AWM-6000 supports remote probe analysis of APs. It listens to and captures Wi-Fi packets in the coverage and mirrors them to a local analysis device in real-time to help network administrators better perform troubleshooting or optimization analysis. The remote probe analysis function can perform non-convergence mirroring of a working channel and sampling of all channels in polling mode as well to flexibly meet various wireless network monitoring, operation, and maintenance requirements.
Multiple management modes and uniform management platform The AWM-6000 supports various management modes such as command lines and web. It can be used to plan, deploy, monitor, and manage APs on an entire network centrally and effectively at low costs. It may also be used with an AADONA platform for integrated management of wireless and wired devices so that administrators can monitor and manage the entire network in a data center as follows:

1. Generating topologies

2. Checking the working states of APs and the states of online users

3. Planning RF resources on the entire network

4. Locating users

5. Generating security alarms

6. Checking link loads, device usage and roaming records

7. Generating reports


Model Name AWM-6000
Product Series APOLLO
Service port Two 10/100/1000Base-T
Management port One console port (RJ-45)
Power supply AC 100 V to 240 V, 50 Hz to 60 Hz
Maximum power consumption 8W
Working/Storage temperature 0°C to +50°C / 40°C to +70°C
Working/Storage RH 5% to 90% (non-condensing)
Dimensions (W x D x H) 328.2 mm x 170 mm x 42.2 mm
Warranty 3 Year Default + 2 Year Extended, Total 5 Years
Software Specifications
Base number of manageable APs 16
Maximum number of manageable APs 128
Number of manageable ACs in a cluster 64
AP upgrade step 16
Maximum number of concurrent wireless users 5k
ARP table 8K
Switching time during roaming < 30 ms
L2 protocols and standards IEEE802.3 (10Base-T), IEEE802.3u (100Base-TX), IEEE802.3ab (1000Base-T), IEEE802.1Q (VLAN), IEEE802.1p (COS), IEEE802.1x (Port Control)

IGMP Snooping, MLD Snooping


L3 protocols and standards Static Routing

RIPv1/v2, OSPF, BGP, VRRP, IGMP v1/v2/v3

ARP, ARP Proxy


Wireless protocols and standards 802.11, 802.11a, 802.11b, 802.11g, 802.11n, 802.11d, 802.11h, 802.11i, 802.11e, 802.11k
CAPWAP protocol Supports L2/L3 network topology between an AP and an AC.

Enables an AP to automatically discover an accessible AC.

Enables an AP to automatically upgrade its software version from an AC.

Enables an AP to automatically download configurations from an AC.

IPv6 protocols and standards IPv4/v6 dual-stack, manual tunnel, ISATAP, 6to4 tunnel, IPv4 over IPv6 tunnel, DHCPv6, DNSv6, ICMPv6, ACLv6, TCP/UDP for IPv6, SOCKET for IPv6, SNMP v6, Ping /Traceroute v6, RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS, static routing, OSPFv3, IPv6 SAVI
High reliability 1+1 fast backup

N+1 backup

N+N backup

Portal 1+1 backup

DHCP server hot backup

RF management Setting country codes

Manually/automatically setting the transmit power

Manually/automatically setting the working channel

Automatically adjusting the transmission rate

Blind area detection and repair RF environment scanning, which enables a working AP to scan the surrounding RF environment

RF interference detection and avoidance

SSID-based or Radio-based limit on the number of users

User online detection

Automatic aging of traffic-free users

Prohibiting the access of clients with weak signals

Remote probe analysis

Forced roaming of clients with weak signals

11n-preferred RF policy

SSID hiding

20 MHz and 40 MHz channel bandwidth configuration

Airtime protection in hybrid access of 11bg and 11n terminals

Terminal-based airtime fairness scheduling

Spectral analysis

Terminal locating (A terminal locating algorithm can be embedded in the AC)

Spectral navigation (5 GHz preferred)

11n only

Security 64/128 WEP, dynamic WEP, TKIP, CCMP, and SMS encryption

802.11i security authentication and two modes (Enterprise and Personal) of 802.1x and PSK

WAPI encryption and authentication

LDAP authentication

MAC address authentication

Portal authentication, including built-in portal, external portal, and custom portal authentication modes

PEAP user authentication

Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC

Radius Client

Backup authentication server

Wireless SAVI

User access control based on AP locations

Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS)

Protection against flooding attacks

Protection against spoofing attacks

Forwarding security control, such as frame filtering, white list, static blacklist, and dynamic blacklist

User isolation

Periodic Radio/SSID enabling and disabling

Access control of free resources

Secure admission control of wireless terminals

Access control of various data packets such as MAC, IPv4, and IPv6 packets

Forwarding IPv6 access and forwarding; constructing IPv6 WLAN access service on an IPv4 network; providing IPv4 WLAN access service on an IPv6 network; and constructing private IPv6 WLAN network service on an IPv6 network

Fast L2/L3 roaming between APs served by the same AC

Fast L2/L3 roaming between APs served by different ACs

IPv4 and IPv6 multicast forwarding


QoS 802.11e (WMM); and 4-level priority queues, ensuring that applications sensitive to the real-time effect, such as voice and video services, are transmitted first

Ethernet port 802.1P identification and marking

Mapping from wireless priorities to wired priorities

Mapping of different SSIDs/VLANs to different QoS policies

Mapping of data streams that match with different packet fields to different QoS policies

Access control of MAC, IPv4, and IPv6 data packets

Load balancing based on the number of users

Load balancing based on user traffic

Load balancing based on frequency bands

Bandwidth limit based on APs

Bandwidth limit based on SSIDs

Bandwidth limit based on terminals

Bandwidth limit based on specific data streams

Power saving mode

Multicast-to-unicast mechanism

Automatic emergency mechanism of APs

Intelligent identification of terminals

Management Web management

Configuration through a console port

SNMP v1/v2c/v3

Both local and remote maintenance

Local logs, Syslog, and log file export


Fault detection


Login through Telnet

Login through SSH

Dual-image (dual-OS) backup

Hardware watchdog

AC cluster management; automatic information synchronization between ACs in a cluster, and automatic or manual push of configuration information

SSID-based user permission management mechanism

Product Purchase Information
Model Name : AWM-6000
Mandatory AADONA wireless AC (including a license for managing 16 APs by default)
Upgrade License : AC-L16
Optional (Max 128 AP) Upgrade license of the AADONA wired/wireless integrated smart AC (for upgrading 16 APs, minimum number of upgrade step is 16, 32, 128 APs)
Cloud* Cloud server is hosted in the US, India hosting will be done in 2021.

General Inquiries

There are no inquiries yet.



Forgotten Password?