APOLLO : AIW-1200

1200AC In-Room Wall Mount Hospitality Access Point

  Ask a Question

OVERVIEW

AIW-1200 11AC dual-band wall-mount wireless AP is a new-generation 802.11ac based high-performance device by APOLLO for hospitality, education, government, business, and medical industry. AIW-1200 supports the 802.11AC standard and available wireless bandwidth of 1.167Gbps. AIW-1200 adopts Atheros chip for reliable performance and high user load capacity.

AIW-1200 AP supports Fat and Thin work modes, according to the needs of network planning. When AIW-1200 works as thin AP, we need to use APOLLO intelligent controller for management; and it works in standalone mode when used as Fat AP. It’s useful for customers to upgrade their small WLAN network to a large network, to protect the user’s investment.

FEATURES

Wired and wireless gigabit access AIW-1200 AP supports two gigabit wired uplink ports, which truly meets the bandwidth requirement of wireless clients and four gigabit downlink Ethernet ports.
The integration of the 4 Gigabit downlink ports supports individual VLAN configuration, the wired and wireless traffic can be logically separated. It supports remote UP/DOWN operations at the same time and can avoid the unauthorized cable connection. It also supports a unified configuration of cable outlets through a remote GUI. Flexible configuration management approach can meet the diverse needs of customers’ wired access.
High load capacity AIW-1200 adopts enterprises grade Atheros chip with a powerful CPU. Unlike SOHO devices with a low-grade chip that is not capable to handle enterprise traffic, school, and hospitality industry, AIW-1200 has a high load capacity and is a perfect solution for all verticals.
Coverage Super sensitivity and intelligent velocity molding technology allow AP to cover through walls,
AIW-1200 expands its coverage by improving the receiving signal sensitivity of antennas, and transmit RF signals through thick walls. Wireless signal transmission is bidirectional, an increase in coverage must guarantee the normal reception of the weak signal. With built-in intelligence AIW-1200 beamforming technology form the strongest signal in the direction of the mobile client and enhance the signal strength of a mobile terminal.
In case of generic domestic level SOHO AP which simply increases the transmit power to increase coverage, signal strength is inflated and the machine gets heated up while serving clients. Hence, AP can not guarantee the
normal reception and transmission of weak terminal data. APOLLO smart AP’s provide the best in class coverage with reliable throughput.
Gigabit Pass through port AIW-1200 will access the existing wired information ports of clients, wired and wireless access ports are integrated into a device. Customers are more concerned about whether the wired port can be used normally once the wireless AP is faulty. AIW-1200 can connect the Gigabit uplink ports through the lateral gigabit transparent port (PASS-THROUGH) Even though AP is down or powered off, customers can still access the wired internet through the transparent port, to counter AP’s fault through the wired port. In addition, with the use of dual Gigabit uplink ports, combined with the transparent Gigabit ports, you can design a wired / wireless network with physical isolation: wireless traffic transmitted to uplink Gigabit WAN port, the wired traffic that needs to be isolated transmitted to transparent Gigabit port and uplink gigabit PASS-THROUGH port.
The transparent Gigabit port also meets the needs of connections of the digital local telephone access to the internal telephone system, without additional deployment of digital phone lines.
High-speed Wi-Fi, excellent gigabit access AIW-1200 supports the new 802.11AC standard, better than the traditional 802.11n AP wireless bandwidth, providing wireless experience compared to Gigabit wired speed for users. Combined wired port intelligent configuration and user authentication, AIW-1200 is an ideal choice for high-speed Internet access and indoor equipment connection.
Three in one access AIW-1200 supports high-speed WIFI network, Gigabit wired network, and digital telephone. It provides three in one access, providing WI-FI access, wired Ethernet access and telephone access for various equipment and applications.
Easy to deploy and configure, rapid and secure installation AIW-1200 AP’s are easy to deploy in all scenarios like offices, hotels, hospitals or dormitories. AIW-1200 can be perfectly plugged-in to any standard network information panel. With its good appearance, it does not harm the existing aesthetics of an indoor environment. With the use of POE power supply, it can reduce wiring. The installation has low cost, no noise, short installation period (the time to install an AP is less than 3 minutes), it does not affect the normal office, business and customer service. In addition,AP use flame-resistant materials and standard anti-theft screws.

SPECIFICATIONS

Model Name AIW-1200
Product Series APOLLO
Hardware Specifications
Dimensions (mm) 150 x86 x27
Back panel port Two 1000M Ethernet ports
Front panel port Four 10/1000M ports,one 1000M passthrough port
The anti-theft screw Lateral direction support an anti-theft screw, AP indoor coverage is safe and secure
PoE 802.3af /802.3at
Local Support 48V DC local power supply
USB 2.0 1 port
PSE PSE (48V) supported in LAN4 Port
Transmitting power 17dBm
Maximum power consumption <6W
Antenna 3dBi antenna
Working temperature 15% ~ 95% Non-condensing
Warranty 3 Year Default + 2 Year Extended, Total 5 Year
Software Specifications
WLAN
Product positioning In-wall AP
Working frequency band 2.4GHz and 5GHz
Virtual AP (BSSID) 32
Number of spatial streams 2
Dynamic channel adjustment (DCA) Yes
Transmit power control (TPC) Yes
Blind area detection and repair Yes
SSID hiding Yes
RTS/CTS Yes
RF environment scanning Yes
Hybrid access Yes
Restriction on the number of access users Yes
Link integrity check Yes
Prohibiting the access of terminals with weak signals Yes
Intelligent control of terminals based on airtime fairness Yes
11n enhancements
40 MHz bundling Yes
300 Mbps (PHY) Yes
Frame aggregation (A-MPDU) Yes
Maximum likelihood demodulation (MLD) Yes
Transmit beamforming (TxBF) Yes
Maximum ratio combining (MRC) Yes
Space-time block coding (STBC) Yes
Low-density parity-check code (LDPC) Yes
11AC
802.11AC protocol  Yes
Cable
Wired port VLAN configuration Yes, VLAN can be configured on each wired port
AC remote configuration Yes, including CLI and WEB modes
Security
Encryption Yes 64/128WEP, TKIP, CCMP encryption
802.11i Yes
WAPI Yes
MAC address authentication Yes
LDAP authentication Yes
PEAP authentication Yes
WIDS/WIPS Yes
Protection against DoS attacks Anti-DoS for wireless management packets
Forwarding security Frame filtering, white list, static blacklist, and dynamic blacklist
User isolation AP L2 forwarding suppression Isolation between virtual APs (multiple SSIDs)
Periodic SSID enabling and disabling Yes
Access control of free resources Yes
Secure admission control of wireless terminals Secure admission control of wireless terminals based on DCSM
Wireless SAVI Yes
ACL Access control of various data packets such as MAC, IPv4, and IPv6 packets
Secure access control of APs Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC
Forwarding
IP address setting Static IP address configuration or dynamic DHCP address allocation
IPv6 forwarding Yes
IPv6 portal Yes
Local forwarding Yes
Multicast IGMP-Snooping
Roaming Yes
AP switching reference Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc.
WDS Yes
QoS
WMM Yes
Priority mapping Ethernet port 802.1P identification and marking
Mapping from wireless priorities to wired priorities
QoS policy mapping Mapping of different SSIDs/VLANs to different QoS policies
Mapping of data streams that match with different packet fields to different QoS policies
L2-L4 packet filtering and flow classification Yes: MAC, IPv4, and IPv6 packets
Load balancing Load balancing based on the number of users
Load balancing based on user traffic
Load balancing based on frequency bands
Bandwidth limit Bandwidth limit based on APs
Bandwidth limit based on SSIDs
Bandwidth limit based on terminals
Bandwidth limit based on specific data streams
Power saving mode Yes
Automatic emergency mechanism of APs Yes
Intelligent identification of terminals Yes
Wireless network VAS Abundant wireless network VASs; applications based on smart terminals; advertisement push based on site locations; personalized push of the portal
Multicast enhancement Multicast to unicast
Management
Network management Centralized management through an AC; both thin and fat modes
Maintenance mode Both local and remote maintenance
Log function Local logs, Syslog, and log file export
Alarm Yes
Fault detection Yes
Statistics Yes
Switching between the fat and thin modes An AP working in thin mode can switch to the fat mode through a wireless AC; An AP working in fat mode can switch to the thin mode through a local control port or Telnet.
Remote probe analysis Yes

Watchdog

Yes

Note:

 

Cloud *

Cloud server is hosted in the US, India hosting will be done in 2021.

 

General Inquiries

There are no inquiries yet.

wpChatIcon

Registration

Forgotten Password?